Band Bending Engineering At Organic/Inorganic Interfaces Using Organic Self‐Assembled Monolayers

Below is result for Band Bending Engineering At Organic/Inorganic Interfaces Using Organic Self‐Assembled Monolayers in PDF format. You can download or read online all document for free, but please respect copyrighted ebooks. This site does not host PDF files, all document are the property of their respective owners.

complete cv 03R - Chemical and Biological Engineering

Recombination and Open-Circuit Voltage in Polymer Solar Cells via Self-Assembled Monolayer. Adsorption at the Organic-Metal Oxide Interface Journal of 

Revealing molecular conformation induced stress at

by Z Wang 2021 also correlates instability of organic devices with the interface in which a self-assembly monolayer (SAM) is inserted between the.

Morphological Design of Nanoscale Polymer Systems: - Deep

by J Wenderott 2018 Self-Assembled Monolayers at the Conjugated Polymer/Electrode Interface: Implications for Charge Transport and Band-Bending Behavior

© Copyright 2016 Nathan Cernetic - University of Washington

by N Cernetic 2016 Multifunctional Self-Assembled Monolayers for Organic Field-Effect Transistors These metal oxide interfaces are typically modified with rationally.

Fully Printable Mesoscopic Perovskite Solar Cells with

by L Liu Cited by 348 ABSTRACT: By the introduction of an organic silane self-assembled monolayer, an interface-engineering ap- proach is demonstrated for hole-conductor-free, 

Efficient light emission from inorganic and organic - Nature

by R Schlesinger 2015 Cited by 103 the frontier levels of the inorganic and organic semiconductors. Lowering the work function of ZnO using dipolar self-assembled.

Nanoscale Investigation and Control of the Interfacial

contrary, the DNTT transistors with the alkyl SAMs exhibit a small capacitance potential for future interface engineering in organic electronic devices.

A review of self-assembled monolayers as potential THz

by M Celestin 2014 Cited by 26 The uses of organic molecules are highly versatile as they can be tailored in a number of ways to achieve varying electrical and physical 

Interface Engineering with Self-assembled Monolayers for

by FAUSM und Werkstofftechnik Cited by 1 13, 14 Self-assembled mono- layers (SAMs) composed of densely packed organic molecules deposited on metal oxides constitute hybrid organic-inorganic dielectric 

DOI: 10

Article type: Full Paper. Band bending engineering at organic/inorganic interfaces using organic self-assembled monolayers. Oliver T. Hofmann* and Patrick 


by JW Ward 2015 Cited by 1 As a member of the Organic Electronics Research group, we have developed a culture 2.3.3 Interface Energetics and Electrical Characterization of SAMs.


by D Janssen 2006 Cited by 7 optimized to obtain the required, qualitative SAMs for use in organic thin-film transistor structures. Also, an extensive study of the solvent wettability 

Porous Honeycomb Self-Assembled Monolayers - American

by S Das ABSTRACT: Molecules with tripodal anchoring to substrates represent a versatile platform for the fabrication of robust self-assembled 

Engineering of Bulk and Nanostructured GaAs with Organic

by K Adlkofer 2003 Cited by 2 This thesis deals with a new method to engineer stoichiometric gallium arsenide In Chapter 5, the optimized SAMs and the bare GaAs (prepared by wet 

The Mechanism of Work Function Tuning with Covalently

Self-assembled monolayers are organic monomolecular layers covalently bound to The Schottky theory predicts a band bending of the semiconductors 

Charge transfer at hybrid inorganic-organic interfaces - arXiv

by X Wang 2016 properties.1,2 The molecular SAMs are also found to be potential dopants to tune band alignments of the participating organic and inorganic materials.

Tailoring the growth and electronic structures of organic

by A Tan 2019 Cited by 4 The self-assembly and growth of organic molecular thin films on surfaces is function using self-assembled monolayers, metal oxides, inorganic salts, 

Hybrid Sensing Platforms, Monolayer Doping, and Modeling

25 Sep 2018 potential uses of organic monolayers and self-assembly processes in the rapidly evolving field of molecular−inorganic hybrid.

Modifying the Surface Properties of Indium Tin Oxide with

by D Kim 2018 Cited by 5 *Email Address: [email protected] Keywords: indium tin oxide (ITO), self-assembled monolayers (SAMs), surface modification, organic electronics, electrodes.

REVIEWS - Kian Ping Loh - NUS

by K Leng Cited by 44 in organic inorganic hybrid perovskites, due to their interface can be used to support the self-assembly of monolayers of the organic cation, 

Work Function Control of Germanium through - NSF-PAR

by AC Serino 2017 Cited by 27 precision band engineering with minimal impact on process- organic self-assembled monolayer (SAM) formation.19.

Modification of Semiconductor Surface Properties with

by DL Allara 1994 development of self-assembled monolayers of organothiols, in particular, electrical behavior of the film and its interface with the semiconductor, 

Strain-relief by single dislocation loops in calcite - UCL

by J Ihli Cited by 33 (CaCO3) crystals on organic self-assembled monolayers, where these are that templating of inorganic crystals by the organic interface is.

CV Bent October 2019 - Bent Research Group - Stanford

16 Mar 2020 Inorganic and Organic Thin Films for Solar Cells; Self-assembled monolayer resist for atomic layer deposition of HfO2 and ZrO2 high-κ 

Band Bending Engineering at Organic/Inorganic Interfaces

by OT Hofmann 2017 Cited by 17 In experiments, ZnO is typically n-type doped,[41] with its. Fermi level ≈200 meV below the conduction band onset. Since all SAMs considered 

Energy-Level Engineering at ZnO/Oligophenylene Interfaces

by M Timpel 2015 Cited by 34 monolayers (SAMs) on the Zn-terminated ZnO(0001) surface in order to engineer the energy-level alignment at hybrid inorganic/organic semi-.


by SE Atanasov 2015 The integration of organic and inorganic thin films is critical for the development compression masking, masking with self-assembled monolayers (SAMs), 

Work Function Control of Germanium through Carborane

by AC Serino 2017 Cited by 27 precision band engineering with minimal impact on process- organic self-assembled monolayer (SAM) formation.19.5 pages

X-ray Photoelectron Spectroscopy for Determining Interface

by TC Taucher 2020 In the field of organic electronics, chemically bonded self-assembled monolayers (SAMs) have been used to change the electronic properties 

Modelling Organic-Inorganic Hybrid Interfaces

by OT HOFMANN 2019 Cited by 1 account for doping and band-bending in inorganic semiconductor sub- shifts in organic transistors due to self-assembled monolayers at the dielec-.

Interface driven engineering of charge transport across

by J Chen 2017 2.1 Historical review of development of self-assembled monolayers Molecular electronics uses organic molecules to replace inorganic electrical 

PDF, Electronic properties of hybrid organic/inorganic

by MH Futscher 2018 Cited by 16 induced band and energy level bending in the inorganic and organic component away from the interface, and an interface dipole due to the 

Static and dynamic electronic characterization of organic

by O Pluchery 2016 Cited by 18 (MIS) junctions with an organic monolayer as the insulating electric parameters of the interface (band bending, work func-.

Application of Self-Assembled Monolayers to InGaZnO Thin

by JR Motley 2016 Cited by 1 IGZO TFTs operate as n-type semiconductors due to their high donor concentrations. [30]. IGZO is transparent to the visible spectrum with a band 

Symposium I: 2005 MRS Fall Meeting (PDF) - Materials

Interfaces in Organic and Molecular Electronics II. November 28 - December 2, 2005 substrates covered with three types of self-assembled monolayers.

download paper - PROCEEDINGS OF SPIE

and organic-organic interfaces for optimum performance. charge injection by measuring the I/V curves for gold electrodes covered by polar self-assembled.

Self-assembled monolayers in organic electronics - RSC

7 Oct 2016 The possibility of performing surface chemistry tailoring with. SAMs constitutes a versatile approach towards the tuning of the electronic and 

Modifying Charge Carrier Injection Using Self-Assembled

Modifying Charge Carrier Injection Using. Self-Assembled Monolayers in Organic band bending at the electrode/ polymer interface. Thus, in this report, 

Dipole-field-assisted charge extraction in metal-perovskite

by X Lin 2017 Cited by 44 Hybrid organic-inorganic halide perovskites are low-cost solution-processable solar cell (SAMs) featuring oriented molecules with permanent dipole.


by M Li 2007 Cited by 12 The SAM with reactive terminal group (-COOH) shows higher thermal Organic-inorganic hybrid device: Self-Assembled Monolayer Assisted.

Making Inorganic Oxides Stimuli Responsive via - UNSWorks

by X Chen 2013 attract the attention of scientists and engineers from different area described SAMs as high ordered organic assemblies formed on the 

Material Matters Vol 3. No. 2 - Sigma-Aldrich

by ALDAV Tool Deposition of Organic and Hybrid Organic-. Inorganic Polymers. Molecular Monolayers on Silicon Surfaces. Universal Platform for. Surface Modification.

An organosilane self-assembled monolayer incorporated into

by Z Li 2016 Cited by 4 ibility at the organic active layer/inorganic metal oxide interface interface modification using self-assembled dipole molecules.

Interfaces in organic electronics - DiVA

by M Fahlman 2019 Cited by 68 Compared with inorganic semiconductors and metals, organic (semi)conductors possess a By inserting SAMs with thicknesses of up to 3 nm, the EICT of an.45 pages

External control of GaN band bending using phosphonate self

by T Auzelle 2020 Cited by 1 Rinke, Band Bending Engineering at. Organic/Inorganic Interfaces Using Organic Self-Assembled. Monolayers, Adv. Electron. Mater. 3, 1600373 ( 

Application and Characterization of Self-Assembled

by ME Celesin 2013 Table 4.1: Tilt and twist angles for fully saturated alkanethiol SAMs on Finally, an analysis of experimental data using these organic monolayers will 


by PJ Hotchkiss 2008 Cited by 10 Discovery of Monolayers of Organic Molecules and Their Growth The term self assembled monolayer (SAM) is widely use in the literature and not.

Molecular Spintronics: from Organic Semiconductors to Self

by M Galbiati 2014 Cited by 14 2.2 Main difference between organic and inorganic materials 20 II Self-Assembled Monolayers for molecular spintronics.

Nanofabrication Techniques in Large-Area Molecular

by L Herrer 2020 Cited by 5 The combined use of organic molecules and carbon-based or A general procedure for SAMs fabrication is illustrated in Figure 2.

An in-situ Reaction Route to Molecular Level Dispersed

The introduction of ordered self-assembly T-PTCDI/ZnO Hybridization of organic materials with inorganic nanoparticles usually gives a full play to the